Installing Your ECOHEADS Spray Nozzle

Not every basin is the same and if you have any questions about these instructions, please reach out to us to assist. We have a 99% success rate, so we can help!

NOTE: Do you need a hose? 

Step-by-Step Instructions

Unscrew Existing Showerhead		Unscrew Existing Showerhead Base		Install ECOHEADS Base*
If you are able to unscrew the nozzle from your hose, this is simple and you can remove it from the hose and skip to #6. Lucky you!		You may not have a base or a hose receiver as this is more common in Europe and Australia. Skip to #4 if this is the case.		This part is optional and the majority of US and Canada-based salons cannot use this part. Skip to #4 if you do not have space around your vacuum breaker.
Check Your Current Hose Fitting		Securely Place Rubber Rings		Screw on ECOHEADS Showerhead
Included in your ECOHEADS box is a black metal adapter. This is used if your hose has a male fitting. You do not need this part if your hose has a female fitting.		This part is important to avoid leaks! Also, please be careful to ensure the washers do not obstruct the flow of water as this is a common culprit of low pressure after install. NOTE: you may also want to use a small amount of plumber's tape around the threads for a perfect seal.		This part is the fun step! Screw on your new spray nozzles and give them a spin!